How to Reset an LG DLG2102W Dryer Thermal Cut-Off Switch
LGLG DryerModerate⏱ 15 minutes
Инструкция на английском (оригинал iFixit). Непонятные термины — в разделе «Основы → Словарь».
An LG dryer thermal cut-off switch is a safety device that helps protect the dryer from overheating. When the dryer gets too hot, the switch can shut off the heating system or stop the dryer from functioning properly causing clothes to not dry.
In some cases, the switch can be reset by pressing the reset button until it clicks. This guide will explain how to safely access and reset the thermal cut-off switch on an LG dryer. Before beginning, the dryer should be turned off and unplugged to prevent electrical shock or injury.
🧰 Tools
- Knife
- Flashlight
- Philips #2 Screwdriver
ШагиSteps
1
Step 1
- Unplug the dryer from the wall.
2
Step 2
- Move dryer away from the wall.
- Ensure all wiring is removed from the work area to avoid any tripping.
3
Step 3
- Use a knife to remove side panel.
4
Step 4
- Pull out tube that leads outside
5
Step 5
- Use a Philips #2 screwdriver to remove screw from back panel.
6
Step 6
- Remove the back panel.
7
Step 7
- Pull aluminum vent out.
8
Step 8
- Insert flashlight to see better inside dryer.
9
Step 9
- Locate and press down until you hear a click sound.
To reassemble your device, follow these instructions in reverse order.
«How to Reset an LG DLG2102W Dryer Thermal Cut-Off Switch» — автор Alfonso Garcia, iFixit, лицензия CC BY-NC-SA 3.0. Показано без изменений. Открыть оригинал и комментарии →