How to Clean/Replace the Filter on a LG Direct Drive WM3250H*A

LGLG washing machineEasy⏱ 15 minutes

Инструкция на английском (оригинал iFixit). Непонятные термины — в разделе «Основы → Словарь».

This is a guide for the cleaning of a filter in an LG Direct Drive WM3250H*A Front Load washing machine. A dirty washing machine filter is the primary cause of things like failure to drain, excessive noise, error codes, etc. There is a great number of people who mistake a dirty filter for a broken washing machine. When this happens, most people waste their money and turn to professionals or dump the washer altogether. This guide could not only help you save your money and time, but also help you contribute towards not wasting things that aren't broken and instead are repairable.

🧰 Tools

Container
Heavy duty toothbrush

ШагиSteps

Step 1

Open the door to the filter housing on the bottom left side of the washing machine.

Step 2

Grab a decently sized container to drain the drain tube in.

Step 3

Pull the draining tube out from the clasp.
Take off the cap from the drain tube.

Step 4

Drain the water from the drain tube into a container.

Step 5

Open the filter housing and unscrew the filter to examine it.

Step 6

Wash the filter with a heavy-duty toothbrush or just a regular toothbrush.
If necessary, you may replace the filter altogether.

To reassemble your device, follow the above steps in reverse order.

«How to Clean/Replace the Filter on a LG Direct Drive WM3250H*A» — автор Jasmine Dawson, iFixit, лицензия CC BY-NC-SA 3.0. Показано без изменений. Открыть оригинал и комментарии →