LG Front Load Washing Machine Inlet Valve Filters Replacement
LGLG Front Load Washing MachineEasy⏱ 30 seconds - 1 minute
Инструкция на английском (оригинал iFixit). Непонятные термины — в разделе «Основы → Словарь».
Follow this guide to replace the inlet valve filters in your LG front load washing machine.
The inlet valve filters block debris from the water inlet hoses. These filters can get clogged with sediment, which slows down the tub filling process.
This guide will work for most LG front load washing machines. This guide is written with a model WM3050CW washer. If you have a different model, you may encounter some minor disassembly differences, but the overall repair process will be the same.
🧰 Tools
- Needle Nose Pliers
ШагиSteps
1
Step 1
- Turn off the main water supply
- Unplug your washer
- Disconnect all water connections at the rear of your washer
2
Remove the filters
- Use needle nose pliers to pull the inlet valve filters straight out of the inlets in the chassis.
- Remove the filters.
To reassemble your device, follow these instructions in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Ask our Answers community for help.
«LG Front Load Washing Machine Inlet Valve Filters Replacement» — автор Bill Gilbert, iFixit, лицензия CC BY-NC-SA 3.0. Показано без изменений. Открыть оригинал и комментарии →