LG Front Load Washing Machine Pressure Sensor Replacement
LGLG Front Load Washing MachineModerate⏱ 15 - 30 minutes
Инструкция на английском (оригинал iFixit). Непонятные термины — в разделе «Основы → Словарь».
Use this guide to replace the pressure sensor in your LG front load washing machine.
The pressure sensor detects how much water is in the tub. The sensor LG uses in these washers have no moving parts, so it's unlikely to break. If the sensor malfunctions, the tub may under-fill or overfill.
This guide will work for most LG front load washing machines. This guide is written with a model WM3050CW washer. If you have a different model, you may encounter some minor disassembly differences, but the overall repair process will be the same.
🧰 Tools
- Phillips #2 Screwdriver
ШагиSteps
1
Step 1
- Turn off the main water supply
- Unplug your washer
- Disconnect all water connections at the rear of your washer
2
Unfasten the top panel
- Remove the screw(s) securing the top panel brackets to the back panel.
3
Remove the top panel
- Slide the top panel towards the rear of the device to disconnect its clips.
4
Step 4
- Tilt the top panel upward to completely disconnect it from the chassis.
- Remove the top panel.
5
Disconnect the pressure sensor
- Disconnect the connector from the pressure sensor.
6
Step 6
- Disconnect the hose from the pressure sensor.
7
Unfasten the pressure sensor
- Remove the screw(s) securing the pressure sensor.
8
Remove the pressure sensor
- Unclip the pressure sensor from the chassis or other components.
9
Step 9
- Lift the pressure sensor away chassis and remove it.
To reassemble your device, follow these instructions in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Ask our Answers community for help.
«LG Front Load Washing Machine Pressure Sensor Replacement» — автор Bill Gilbert, iFixit, лицензия CC BY-NC-SA 3.0. Показано без изменений. Открыть оригинал и комментарии →