LG WM3050CW Rotor Replacement
LGLG WM3050CWModerate⏱ 10 - 20 minutes
Инструкция на английском (оригинал iFixit). Непонятные термины — в разделе «Основы → Словарь».
Use this guide to replace the rotor in your LG WM3050CW Washing Machine.
The rotor is part of the washer's direct drive motor. It doesn't have any electrical components and is less likely to break compared to the motor stator.
🧰 Tools
- Phillips #2 Screwdriver
- Socket Wrench
- 17mm Socket (3/8in Drive)
⚙️ Parts
- LG Washer Drive Motor Rotor Assembly - AHL72914402
ШагиSteps
1
Step 1
- Turn off the main water supply
- Unplug your washer
- Disconnect all water connections at the rear of your washer
2
Unfasten the rear panel
- Use a Phillips driver to remove the four 10.7 mm‑long screws securing the rear panel.
3
Remove the rear panel
- Lift the rear panel upward to release its bottom clips.
- Pull the rear panel away from the chassis to release the remaining clips.
4
Step 4
- Remove the rear panel.
5
Unfasten the rotor
- Use an impact driver to remove the 17 mm nut securing the rotor.
- Alternatively, you can use a wrench and a hammer to loosen the nut.
6
Remove the rotor
- Pull the rotor straight off the stator and drive shaft splines to remove it.
To reassemble your device, follow these instructions in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Ask our Answers community for help.
«LG WM3050CW Rotor Replacement» — автор Bill Gilbert, iFixit, лицензия CC BY-NC-SA 3.0. Показано без изменений. Открыть оригинал и комментарии →